Sliding Patio Doors Repair: 11 Thing That You're Failing To Do

· 6 min read
Sliding Patio Doors Repair: 11 Thing That You're Failing To Do

Sliding Patio Doors Repair

Sliding patio doors are an excellent way to take advantage of your outdoor space, however they can become difficult to open or close. This could be due to a range of issues, including dirty tracks or rollers that are not aligned properly.

Clean and lubricate your rollers. You can also utilize the adjustment holes on the bottom of the panel to adjust the alignment of your rollers.

Dirty or Damaged Track

A sliding door that doesn't slide properly can be caused by an unclean or damaged track. Over time, dirt, grit, and even rust can build up and block the track from being able to move smoothly. The solution is a thorough cleaning with an abrasive and mild detergent. It is best to do this task regularly to ensure the smooth operation of your door and prevent the need for expensive repairs later on.

A leaking door can also be a common problem. It requires immediate attention in order to stop structural damage, water damage and mold growth. The problem is usually caused by worn weather stripping and a misaligned door. This can be rectified by replacing the weather stripping and aligning the doors.

Another common problem that can be resolved with some DIY work is the problem of rollers that veer off the track. This task can be difficult so you should ask a trusted friend to help you. To move the rollers around, stand inside the house and lean one of the panels towards you. To stop the panel from falling, place it on sawhorses after it has been removed from the bottom track. Then, loosen the screws that keep each roller in place, and take them off with the help of a screwdriver. Now, you can get rid of any dirt stuck between the wheel and tracks. Then, clean each wheel with denatured alcohol on a rug. Reposition the wheels on their tracks and attach them again.

If a portion of the track is bent, it may be possible to straighten it with the help of a rubber mallet and a block of wood. If the bent portion is near hinges or has the potential to cause further damage, it's best to contact a professional.

Rollers that are not aligned


If your sliding door has difficulty sliding, it's most likely that the rollers are not aligned correctly. The wheels may be dirty, rusted or their bearings have worn out. This friction causes the door to catch and grind when it is opened or closed. It can also cause squeaking noises.

This is a straightforward fix. The wheels are on a bracket which can be adjusted, which means you don't need to take off the door. Use a screwdriver and find the adjustment holes on the frame (usually either side). Turn the screws to control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise rotation lowers it. Continue adjusting until the door is moving smoothly and quietly when open or closed.

It is important to adjust the wheels before adjusting the latch. The latch hooks need to line up with the strike plate (the opening through which the latch locks) in order for the lock to work correctly. If you don't, the latch could accidentally open or close while you're out of the room.

The sliding patio doors are an investment. Making sure they are in good condition will ensure your family's safety. You can avoid costly repairs by addressing common issues like faulty rollers, tracks and handles. For more help with your patio doors, call our team. We can help keep your sliding patio doors in top condition by evaluating the repairs needed. Our experts can also help with any replacement parts that you might require.

repair patio door lock  is damaged or damaged

Sliding patio doors are a great addition to any home and offer an attractive and convenient alternative to swing-open or hinged patio door options. Like any other hardware item sliding patio doors are prone to develop problems in time. Many of these issues can be fixed by using a bit of DIY knowledge.

A common issue that affects sliding patio doors is gaps in the frame. It could be caused by a variety of factors, such as a an improperly aligned track or rollers, a damaged track or door, or a bowing door frame. Most of the time, the cause of this problem can be easily fixed by taking the door off and reattaching the track or rolling elements. This must be done with extreme care to not harm the track or frame.

In some cases, it may be necessary to replace the entire track, which can be easily accomplished using a universal replacement kit which is readily available at major hardware stores. These kits are easy to install and will have your door operating correctly in no time.

It is crucial to regularly inspect the frame of your sliding door and hardware for signs of wear and tear, for instance loose bolts or screws. This is a simple and efficient DIY patio maintenance step that can be accomplished with the help of a screwdriver. It is also important to grease the rollers and tracks of your patio door to ensure smooth operation and keep them from wearing out prematurely.

Patio doors are typically the primary entrance to the backyard and outdoor living area for many homeowners. To ensure security and comfort in the home, it is crucial that they work properly. By making the effort to implement these easy DIY maintenance steps, homeowners can prolong the life of their sliding patio doors, and avoid expensive repairs or replacements.

Faulty Handle

The sliding patio doors are a great way to enter your home and gain access to your backyard, however they can be difficult to operate when they become misaligned. A faulty handle can also cause the door to become stuck or difficult to open and close. The good news is that repairing loose handles is a simple task that can be accomplished at home.

In most instances, a loose handle is the result of screws working into the backplate. To remedy the issue, tighten the screws on the inside handle with the help of a screwdriver. If you notice that the handle is loose, it may be a sign that the threads have worn and need to be replaced.

A broken latch may be the reason. This is more likely to occur if the latch is made of plastic instead of metal. If the latch isn't turning or catching, you should try oiling it first to see if it helps. If this does not work, you may have to replace the lock.

If the handle is damaged or broken, it can be difficult to use. If this happens, you will have to replace the handle with one that matches the style and style of your patio doors.

Feldco can help restore your patio doors to their former splendor, no matter if they are new or old-fashioned. We have doors of high-quality in a variety of sizes and styles that can be adapted to perfectly fit your home. Contact us today for more about our products! We provide services to Southern California homeowners, including Ventura County and Orange County.

Unusual Weatherstripping

It's time to change your weather stripping if you see light in the doors and windows or sense a draft pulsing towards the door or window. These strips create a tight seal that blocks unwanted air, pests, or water from getting inside your home. This keeps the conditioned and heated air inside, saving you money on energy costs.

It may have lost its strong, bouncy seal due to age. This is easy to diagnose by using a dollar bill and putting it through the seal along the top of the door frame as well as the bottom of the door jamb where they overlap. If the dollar bill slides effortlessly between the seal and the door then it's time to replace the weather stripping.

It's tempting to cut off just the worn area of weather stripping and then replace it, but this can result in cracks on the sides of the new stripping and may cause problems with the seal in the future. It's more efficient to replace the entire stripping to ensure that you can be confident knowing your door is properly sealed again.

For an easy DIY project, follow our guide to weather stripping to take off the old weather stripping. Then, you can apply the correct material on your sliding patio door and door frame for a lasting and secure seal. This is a great method to save energy costs and repair your sliding patio door. Don't wait until its too late. You'll be able to save money and improve the look of your home.